dp06s/d series 6w dc/dc converter, dip-package, wide 2:1 input range ds_dp06s/d_07182012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc p1 features ? e fficiency up to 86% ? dip package with industry standard pinout ? wide 2:1 input range ? operating temperature range ?40c to +85c ? isolation voltage 1500vdc ? short circuit protection ? csa60950-1 safety approval ? 3 years product warranty the dp06s/d series are miniature, dip package, isolated 6w dc/dc converters with 1,500vdc isolation. it offers short circuit protection and allows a wide operating temperature range of ?40c to +85c. these isolated dc/dc converters are the latest offering from a world leader in power systems technology and manufacturing D delta electronics, inc. with creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions. model list output current input current efficiency (typ.) input voltage (range) output voltage max. min. @max. load @no load reflected ripple current max. capacitive load @max. load model number vdc vdc ma ma ma(typ.) ma(typ.) ma(typ.) uf % dp06s1203a 3.3 1200 60 429 77 dp06s1205a 5 1000 50 514 81 dp06s1212a 12 500 25 595 6800 84 dp06d1212a 12 250 12.5 595 84 dp06d1215a 12 (9 ~ 18) 15 200 10 595 20 25 1000* 84 dp06s2403a 3.3 1200 60 209 79 dp06s2405a 5 1000 50 251 83 dp06s2412a 12 500 25 291 6800 86 dp06d2412a 12 250 12.5 291 86 dp06d2415a 24 (18 ~ 36) 15 200 10 291 5 15 1000* 86 * for each output input characteristics parameter model min. typ. max. unit 12v input models -0.7 --- 25 input surge voltage (1 sec. max.) 24v input models -0.7 --- 50 12v input models 4.5 6 8 start-up voltage 24v input models 8 12 16 12v input models --- --- 8 under voltage shutdown 24v input models --- --- 16 vdc reverse polarity input current --- --- 1 a short circuit input power --- 1000 3000 mw internal power dissipation --- --- 2500 mw conducted emi (with suffix e only) all models compliance to en 55022,class a and fcc part 15,class a
ds_dp06s/d_07182012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc p2 output characteristics parameter conditions min. typ. max. unit output voltage accuracy --- 0.5 1.0 % output voltage balance dual output, balanced loads --- 0.5 2.0 % line regulation vin=min. to max. --- 0.1 0.3 % load regulation io=20% to 100% --- 0.3 1.0 % ripple & noise (20mhz) --- 50 75 mv p-p ripple & noise (20mhz) over line, load & temp. --- --- 100 mv p-p ripple & noise (20mhz) --- --- 15 mv rms transient recovery time --- 150 300 us transient response deviation 25% load step change --- 2 6 % temperature coefficient --- 0.01 0.02 %/ over load protection foldback 120 150 --- % short circuit protection continuous general characteristics parameter conditions min. typ. max. unit i/o isolation voltage (rated) 60 seconds 1500 --- --- vdc i/o isolation resistance 500 vdc 1000 --- --- m ? i/o isolation capacitance 100khz, 1v --- 380 500 pf switching frequency --- 300 --- khz mtbf (calculated) mil-hdbk-217f@25 , ground benign 1,000,000 --- --- hours safety approvals ul/cul 60950-1 recognition(csa certificate), iec/en 60950-1(cb-scheme) recommended input fuse 12v input models 24v input models 1500ma slow-blow type 700ma slow-blow type environmental characteristics parameter conditions min. max. unit operating temperature range (with derating) ambient -40 +85 case temperature --- +90 storage temperature range -50 +125 humidity (non condensing) --- 95 % rel. h cooling free-air convection lead temperature (1.5mm from case for 10sec.) --- 260
ds_dp06s/d_07182012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc p3 power derating curve output power (%) notes 1 specifications typical at ta=+25 , resistive load, nominal input voltage and rated output current unless otherwise noted. 2 transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100% 3 ripple & noise measurement bandwidth is 0-20mhz. 4 these power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. 5 all dc/dc converters should be externally fused at the front end for protection. 6 to order the converter with input filter meeting en55022, class a , add suffix e (e.g. dp06s1203e) to order code. 7 specifications subject to change without notice. mechancial drawing mechanical dimensions pin connections pin single output dual output 2 -vin -vin 3 -vin -vin 9 no pin common 11 nc -vout 14 +vout +vout 16 -vout common 22 +vin +vin 23 +vin +vin nc: no connection ? all dimensions in mm (inches) ? tolerance: x.x0.25 (x.xx0.01) x.xx0.13 ( x.xxx0.005) ? pin diameter ? 0.5 0.05 (0.020.002) physical outline ase size : 31.8x20.3x10.2mm (1.25x0.80x0.40 inches) case material : non-conductive black plastic (flammability to ul 94v-0 rated) weight : 16.9g bottom view 2 11 14 16 23 15.24 [0.60] 5.08 [0.20] 4.1 [0.16] 3 9 22 4.5 [0.18] 10.2 [0.40] 15.22 [0.60] 20.3 [0.80] 2.54 [0.10] 31.8 [1.25] 2.54 [0.10] 0.50 [0.02]
ds_dp06s/d_07182012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc p4 part numbering system d p 06 s 12 05 a form factor family series watt number of outputs input voltage output voltage option code d-dip a~z 01:1w s - single 03:3.3v 03:3.3v a - std. functions p-sip 02:2w d- dual 05: 5v 05: 5v s-smd 03:3w 12:12v 12:12v 04:4w 24: 24v 15: 15v 06:6w 48:48v 24: 24v warranty delta offers a three(3) years limited warranty. complete warranty information is listed on our web site or is available upon re quest from delta. information furnished by delta is believed to be accurate and reliable. however, no responsibility is assumed by delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of delta. delta reserves the right to revise these specifications at any time, without notice.
|
